By clicking the System environment setting button, you can change the MSI dragon center’s settings. Speed is of secondary importance in fan speed. On the Hardware Monitor, enable CPU Smart Fan Target and CPU Min. First, you must go to the BIOS setup page. Using fan speed controls will allow you to find the ideal balance between the performance and temperature of your GPU by increasing its clock frequency and voltage. MSI Afterburner is a great overclocking tool that assists you in getting quick access to your graphics card settings. It is important to keep in mind that two (or more) fans running at 6000rpm can become quite loud. A dedicated fan control switch can also be found on most laptops. You can change the fan speed by dragging a slider or changing the system profile. Using another MSI utility, we will demonstrate how to automate manual fan controls in this article. It’s possible that Dragon Center doesn’t have the option to control the fan on your laptop manually. Your MSI laptop’s Dragon Center utility, which allows you to configure and monitor various components, is included with it.
Yes, MSI Afterburner is a program that allows you to control the fan speed of your graphics card. It usually entails setting a minimum and maximum fan speed, as well as a CPU temperature that is both high and low. Smart Fan Control senses when the CPU is hot and automatically adjusts the fan speed to ensure that the CPU remains at a constant temperature without requiring the fan to be turned on. To increase the speed of your CPU cooling fan, open the drop-down menu and select “Active.” CPU fan speeds should be between 50C and 55C depending on the RPM. The Argus Monitor automatically adjusts fan speeds as needed based on the temperature of the room.Īll graphics cards are compatible with MSI Afterburner, which is completely free to use. CPU fans typically have RPMs ranging from 3,500 to 4,000. A 4-pin PWM fan is one that sends a PWM signal to the fan’s motor via the fourth wire. When the RPM is higher, it is less noisy. There aren’t many extras, but the ones that are included are what you might need.
To change the CPU fan speed, you must first access your BIOS or use the motherboard’s fan control software. MSI Afterburner monitors your entire computer, but it only monitors the graphics component of your system. Then, navigate to the “Advanced” tab and select “Hardware Monitor.” From here, you can change the fan speed by selecting the “ CPU Fan Speed” option and using the + and – keys to increase or decrease the speed. To do this, first enter the BIOS by pressing the F2 key during bootup. If your MSI motherboard has a UEFI BIOS, you can change the fan speed in the BIOS settings.
0 kommentar(er)
